Parota Slab
|
July, 2021 - Milton, FL
Today we hefted a Parota slab out of storage to begin work on a giant barn door for a local business. 52"wide ∙ 102" long ∙ 2-1/4" thick Not heavy at all. 🥴 Click here for the slab flattening video on Facebook |
|
Camphor Slab
|
February, 2021 - Milton, FL
Two salvaged Camphor slabs joined together. 87" x 51" Click here for the finishing video on Facebook 
|
|
Bench
|
January, 2021 - Milton, FL
|
|
Customer Service Podium
|
July, 2019 - Milton, FL
The main structure of the table is constructed from a single piece of live-edge quilted maple. The bark had to be removed from the live-edge prior to any surface milling. This was done with a chisel and cleaned up with sandpaper. Two traditional black cherry bow-ties were inlaid to provide a mechanical clamp against the large crack that protruded from one end. The main structure of the table was fabricated by cutting apposing 45-degree miters in the maple. Floating tenons were used to aid in alignment and provide additional strength to the joint. The result was a c-shaped structure where the grain and figuring of the wood wraps around the corners. A cherry colored gel stain was used to tint the maple. This tone was enough to darken the wood without distracting from the grain of the quilted and birds-eye figuring. Five coats of polyurethane were applied over the gel stain. Polyurethane provides a durable finish that will protect the wood from moisture and everyday contact. |
|
War Chest
|
June, 2019 - Milton, FL
Commissioned going away gift for a respected military leader. This chest was designed to mimic in appearance and construction chests found commonly in the Campaign Furniture genre. It contains several small details that highlight the craftsmanship and quality found in high end furniture. Construction Details: Handcrafted from a single Mahogany board. Mahogany is a wood traditionally used in campaign furniture because of it’s attractive appearance and stability when exposed to varying moisture and temperatures. The alignment of grains across adjacent surfaces is a small detail that provides balance and improves the appearance without being obvious. The joinery used is thru dovetails. This provides an attractive edge detail and durable construction. The darker end-grain from the adjacent board is clearly visible. The end grain is darker because it absorbs finish more readily than side grain. Premium brass hardware was selected for the handles and hinges. The brass handles are inset for an attractive low profile appearance. These handles are polished and unfinished. Over time, they will age to an attractive patina. The chest was finished with three coats of clear lacquer and three coats of wax. This provides a durable easy to maintain finish. Dimensions: 20” Wide X 12” Deep X 14” Tall Material: Mahogany |
|
Custom White Oak Hutch
|
May, 2019 - Milton, FL
Traditional joinery and simple, clean Mid-Century design. |
|
Custom Built In Desk & Wall Cabinet
|
July, 2018 - Crestview, FL
|
|
Arbor & Side Entrance Gate
|
August, 2018 - Milton, FL
One of a kind arbor and side entrance with heavy duty custom gate.
|
|
Multi-Use Shadow Box for retiring US Air Force Veteran
|
September, 2017 - Niceville, FL
White Oak Custom fit for client's cedar chest or to be hung Custom side bead trim made from the same stock as the case Frame cut from one piece of lumber so that the end grain is continuous on both sides Finished with gel stain and a wipe on polyurethane We were asked to build a shadow box for a retiring US Air Force Veteran. His wife had a cedar chest that used to store old uniforms and mementos from his career. The shadow box was sized to fit in the top of the chest or hung on a wall for display. Single coat of gel stain and two coats of wipe on polyurethane (semi-gloss). The gel stain provides a really even color and highlights the grain and character of the oak. Navy blue felt installed on an oak backer board with custom installed of USAF rank pins.September, 2017 - Niceville, FL |
|
Walnut Live Edge Growth Chart
|
October, 2017 - Niceville, FL
Walnut Custom planed to 3/4" thickness Trim routed numbers, finished with a paring chisel Hand painted accents with satin black 2 coats of wipe on semi-gloss polyurethane finish Close friends asked if we could find a really nice piece of lumber to build a growth chart for their son. We dug through our stash of walnut and found a piece with some unique grain. The piece started as a rough cut board approximately 1" thick. It had a pretty good warp and twist on it that needed to be addressed before we could run out through the planer. We knocked the high spurs down with hand planes until one side was flat. After a few passes through the planer, the board was ¾" thick. |
|
|
Traditional Japanese Style Arbor
|
June, 2017 - Milton, FL
Dimensions are: 10 feet tall, 42 inches wide, 500 pounds 6' x 6' Cypress beams sourced from our local cypress mill (Wilson Lumber) Mortise and tenon (no metal used) Traditionally styled and constructed Japanese Arbor 
|
|
Military Shadow Box and Display
|
June, 2017 - Niceville, FL
Dimensions are: 48" long, 12" wide, and 5" tall. Walnut Mitered corners Custom double side-bead trim Hidden magnet anchoring 3 coats of wipe on polyurethane for the finish We were asked to design a very special military shadow box and display for some unique items. |
|
Double Arched Entrance Gate
|
March, 2017 - Niceville, FL
Dimensions: 12 feet wide (Two 6-foot gates) Pressure treated Southern Yellow Pine Ship-lap slats Half lap and pinned joint construction Sealed with Cabots Gold Ultimate finish in Midnight Mahogany Zinc plated hardware We were asked to design a double gate that would provide privacy and an attractive entrance to the back yard. We collaborated with the client on several design iterations. The result was a double arched gate with ship-lap paneling constructed of pressure treated lumber that was sealed to provide years of service. It was mounted with triple steel hinges and spring loaded gate wheels. |
|
Massage Therapy Cabinet
|
August, 2016 - Milton, FL
Dimensions: 22-3/4 X 15-3/4 X 34-1/2 inches Southern yellow pine and birch Roman ogee Bead trim Mortise & Tenon construction Half blind dovetailed drawer on a traditional slide Finished back to allow for flexibility in how it can be used A local massage therapist asked if we could design and build a cabinet for her room. She provided overall dimensions and listed several details that she would like to see. Our customer was ecstatic with the way it turned out. |
|
5 Panel Barn Door with Glass inserts
|
April, 2016 - Valparaiso, FL
Locally milled cypress Hammered texture glass panels Cove trim detail Mortise & Tenon construction Classic 5 panel door - Traditional construction using mortise and tenon joinery. Door was sized to cover existing doorway trim. Primed and painted before delivery and installation. |
|
Craftsman Style 4 Panel Barn Door
|
April, 2016 - Valparasio, FL
Locally milled cypress Birch plywood panels Cove trim detail Mortise & tenon joinery Craftsman 4 panel door - Traditional construction using mortise and tenon joinery. Door was sized to cover existing doorway trim. Primed before delivery and installation. |
|
Trestle Desk
|
December, 2015 - Navarre, FL
Our client provided basic plans for this desk and gave us some artistic freedoms to improve design and appearance. The desk is constructed of yellow pine lumber that provides for an attractive paint or stain finish (The customer requested the desk unfinished). Changes to the design include: Mitered edges Custom wood plugs to hide fasteners Dovetail joints create an attractive look and add strength to design Chamfered edges around the desktop |
|
Pergola
|
July, 2015 - Shalimar, FL
10 ft x 10 ft Custom pergola - Pergola constructed from locally milled cypress lumber. Design incorporates unique features such as a custom end profile and lap joint construction. Finished in Thompson's Water Seal . |
|
Pergola
|
May 2013 -Bagdad, FL
12 ft x 12 ft custom pergola - Constructed from treated pine lumber. 12 feet ceiling height provides a very grand feel. Client plans to install a paver base and has requested custom post skirting. Design incorporates the following unique features: Custom end profiles Built in lights on dimmer switch with hidden wiring Wiring and switch installed for ceiling fan Lap joint construction Sealed end grain on corner posts to extend life |
|
Arbor and Gate
|
June 2014 - Bagdad, FL
Arbor - Custom arbor designed to match client's existing pergola. Constructed of treated pine lumber. Custom Gate - Client requested a custom gate that allowed for riding mower entry and attractive passage into backyard. Constructed from yellow pine and finished with Minwax stain and spar urethane varnish. Gate is 48 inches wide and features: Mortise and Tenon construction Large speakeasy Self-closing hinges and latch Lockable |
|